Production
Production
First Shoot, Here are some images from the first shoot. For the shoot I only had three pieces of equipment in total. One camera and two lights. The camera was a canon - and with this I simply used two studio lights, I only ended up using one of these as both emitted different varies of brightness, and one glowed yellow/orange in colour while the other was stark white. I chose the white light as the look on my subject looked much more professional and natural.
Here in this image you can see the presence of the studio light on the right illuminating the subject. Linking back to my research and planning I highlighted the importance of having some form of lighting preferably engineered. This lighting worked well and helped me achieve the desired effect.Here is an example of one of the lights I was going to use, it's not the light I ended up using as it was not a proper studio light. The light I ended up using eventually was a studio light.
Before using lighting I attempted to shoot with some natural lighting, below are some different examples from this. As this was a test shoot, it's helped teach me for when I complete my final shoot in natural lighting. For starters this is still inside, so although still utilising natural lighting its not great. From the shots shown below you can see most are a mess and this will be an overall breakdown of different things I have learnt from this shoot and need to improve on.
The first thing I must improve on is of course the lighting, natural lighting when indoors does not look good enough so if shooting indoors again engineered lighting needs to be used. Secondly leading on from lighting is different camera setting most importantly aperture and shutter speed. Changing these for my surroundings is extremely important as an overall or underly exposed photo for my project, a magazine is simply unacceptable. My test shoot helped teach me this especially. Secondly it's remembering mise en scene even in photography. Changing what's in the background of the photo, the actors hair and makeup and facial expression are three important factors I must follow in my final shoot. Although facial expressions and props were controlled by me in the test shoot, sticking to this and changing hair and makeup is important for the final shoot.
Aside from the disappointing factors there were some positives from this shoot. Firstly the clothing and wall background choices were excellent. The wall behind my actor is just some artwork from her bedroom, however fits in with my research where I talked about using a different type of location that wasn't inside or outside but a different location that fitted with the actors question answers from the interview. In this case it was all about art and the background was there to shoot with.
Normally a test shoot would only be used to help base your first proper shoot and none of the images would be used for the final item, however in this case a few of the images were such good quality that I decided to use them in my final project. I didn't plan this in my research however it's nice to be flexible when working on my own project and choose the images that I want.
Interview-
The interview went well but did have a few problems. The main issue was I didn't follow my planning well enough. In my planning I noted that when conducting said interview I would prefer to have an audio recording and type it up later to allow my interviewee to feel more relaxed. Instead of this I decided to instead type up the answers while interviewing. I did this because of time saving and I was slightly worried from previous projects of losing audio recordings and having to conduct the entire thing again. So I chose to type it up. This was a difficult choice for me and if I could go back and change it I almost certainly would, it didn't follow my planning and although Im not sure it affected the answers from the questions to much as I knew the subject, it should be common practice to be as professional as possible.
Overall however I am happy with how the interview was conducted, I followed my question list well and managed to even add some more follow up questions when needed. Although the typing elements may of made it slightly more difficult it did save me time and enabled me to begin adding them to indesign straight away. I followed the rules of interview well and got the answers I needed for my magazine.
2nd/3rd Shoot.
In the second and third shoot I went for a different approach. Learning from my previous shoot and going back to cross reference my research I wanted to improve when doing this shoot. I focused on the camera and the setting. Setting up the camera properly, ensuring the shutter speed and aperture. With the first shoot I found lighting particularly difficult so when choosing settings for the second shoot, I took time and planned.
Shown below are examples from the second shoot. I chose to use the same camera. (Canon DSLR) As this was my final shoot I ensured to have at the very minimum three different settings. I finally managed to have a studio setting. And secured my urban setting choosing Norwich. Completing these setting I just had a quick final shoot in the models household to finalise the shoot and ensure I had enough images collected.
From this small collection of images you can see three different locations in the urban setting. I changed the camera setting to go with the backgrounds and different lightings. The first example in this group the aperture and focus is poor due to me not for this occasion changing the settings on the camera but for the following two I remembered my planning and research. I chose the location carefully, having an interesting background that portrayed the urban setting and correctly setting up the camera impacted my photos massively. I changed the aperture upward for the second photo and downward for the third. Also editing the shutter speed.
Directing the model proved challenging. As with current restriction the wearing of a mask is mandatory inside so some of these images are downcast by that. Especially due to the fact that in my primary research it was noted that the models facial expression was important. Instead I focused on the eyes directing the model to look at the camera and more importantly straight into the lens. in a lot of these photos I attempted to stick to the rule of thirds as best I can using the grid on the camera and keeping the eyes level with the line.
Here above are some more images shot on the same camera. It's important to note these pictures use manufactured lighting. The same light I used from my test shoot was used here. And the results I'm happy with, The quality of the image is good but what's even better is the facial expression these are perfect from what I learned in my research. These are the perfect images that could be used on the front cover of my magazine.
Finally as I mentioned earlier I did a studio shoot. These images are shown below and are probably the best quality images I captured in terms of focus and quality of image. As this was also my final day of shooting I wanted to try and get a different perspective so chose to shoot in black and white. Looking back this was a mistake. Although it was a good idea to try a different perspective with black and white it could have easily been done in post production and this lead to me not using any of these images in my final production, despite them being the best quality.
That concludes the extent of my pre production. I'm happy with how it went overall, several shoots worth of images. I felt like from the test shoot onwards the quality just got better and I learned as it went along. It helped me gain knowledge and get better with a camera for sure. The quality of images I captured was in my opinion good enough and exactly what I wanted.
Post Production
Post production for this project proved challenging for me. In most cases of post I'm working with one document and In this case, I had three. A front cover, contents page and double page spread. For all three of these I used the software Adobe Photoshop. When planning my project, I wanted to use InDesign however not knowing the software I didn't want to teach it to myself while creating a major project. So I went with what I knew. I'm going to be breaking down post production for each page.
Page 1-Front Cover
Here is the front cover of my piece.
Firstly I am going to start with the background image, this was not an easy choice as because it was the front cover of the magazine it was hugely important that this was the right image.
Following on from my research I wanted the background to be a solid colour so the image background didn't matter only the model did. This was my first issue. I found a collection of images that would be suitable as front covers, they are shown below. For each image I will explain the pros and cons and ultimately why I didn't choose them.
This is the first example, I wanted to use this image because the models facial expression is good and so is the lighting and quality of the image. This being a fashion magazine the model was also wearing an orange that stands out which linked well with her interview. It ticked all the boxes for a front cover however because an extremely similar image was used for my double page spread I decided against it because to keep the reader interested you have to change things up, especially in fashion.
Here is the second image, again like the first the camera setting and lighting were good quality as is the models eyes and choice of fashion that I helped engineer, however the addition of a face-mask in my opinion doesn't allow this to be useable for a front cover of my magazine.
Here is perhaps like I mentioned earlier the best image quality wise and maybe even fashion wise. The hair and makeup is a step up from previous shoots and although the facial expression is not the strongest it makes up for it in other areas. Nevertheless me shooting this image in black and white doesn't make it suitable for a front cover. From what I learnt in my research colour is key.
Here is the final imagine I had for a potential front cover. For me this was the best choice, it collaborates the rest of the images and had all the pieces I wanted for a front cover. The background wasn't strong however that was fine because I had decided in my research to create a clipping mask and remove the background, this is where the problems began.
I tried the pen tool, all three lasso tools and the quick selection tool. None of these had much success leaving me with extremely rough cut that didn't look good at all. I wondered what was going wrong and realised that I had to add feather when cutting.
Firstly I used the spot healing brush tool to remove any spots or marks or anything of that sort. I then blurred the whole image. And began adding drop shadows and changing the vibrance, saturation and highlighting different parts of the face using the brush tool. One essential effect I used was the hard light effect. I used this especially in the centre of the face and on the clothes, highlighting the two most important areas. I created a master layer to stop it affecting the original image so I had something to go back to and created a new layer for each effect. Shown below is the evidence of my layers.
I then used the liquify effect to specifically manipulate the models facial features as would be done in a professional shoot. Changing the different values with sliders and more specifically the brush tool. Here is a screenshot of that tool with some of the values I changed.
Here is a side by side of my images with and without liquify. (non edited on the left)
The rest of the front cover is mainly text with a shape and barcode added. Each text is correctly spaced out and has been pasted in. I used the Arial black text for the main titles and impact for the subtitles. I also added stroke and drop shadow to the background and sub title text to help highlight. All the text follows a two colour scheme formula which follows my research. White and orange. I added the GQ logo in from the internet and coloured it using the paint bucket tool.
Final Export-
This is my contents page. I wanted to draw away from the normal boring restaurant menu type look. So I went outside the box and broke some conventions. It still follows the page number and description format, however added pictures and spreading it over the two pages strengthens it massively. I think the addition of pictures helps the target audience identify exactly where they want to go.
Firstly creating the large C on the left hand page I followed a YouTube tutorial. It's important that this is noted in my production. The way I did this was by having the text ready and the image, then creating a clipping mask. Using Command+Option+G. Then moving and adjusting the image around inside the text.
I then added images for each page sizing them down, bold text for the page numbers and increasing the size so they are easy to spot. There is also text to accompany this so you know what page you're going to. I tried to limit the text as much as possible to break the conventions and make it more visually pleasing.
Double Page Spread
Final Export-
This is my double page spread. Firstly the image, With the image I created a clipping mask around the model and used the black and white effect to remove the colour from the rest of the image. This mostly worked well however there are still some spots of blue around the top of the models head which are impossible to remove and slightly frustrating.
The text was a challenge, there is a specific convention I had to break that I really didn't want to which was the Abscense of a large letter at the beginning of the text. The page numbers also aren't great as I wanted to make them look more professional. The typeface I'm happy with, highlighting the questions in a different colour makes it stronger. However the overall type face is slightly too small and isn't clear enough.
One of my favourite things about the double page spread are the smaller details like the quality of the image and the added rectangles of orange to make the whole piece flow. I lowered the opacity on these to make them not so bright but still apparent. I followed the general conventions placing the text on the right hand side and the image on the left, with a title, questions and answers.
Once again like the home page I tried to follow a similar colour scheme only using three colours and matching the image colour with the text colour.



























Comments
Post a Comment